Establishing a connection between the security camera and the DVR Tap the SEL key twice and then press the 0 key to change the output to BNC in this case. If you have connected a BNC monitor, you may need to use the remote control for the system’s effective functioning. The default output mode in DVR is HDMI/VGA. By doing this, you can easily switch between the on-screen menus during usage. Step 2: Connect the USB MouseĬonnect the provided USB mouse with the DVR while plugging into the USB port either on the back or front side of the DVR. Please note that VGA Cable is not included in the package, so you have to purchase it separately. Once done, connect the TV or Monitor with either VGA or HDMI cable to the identical connector on the DVR.Īfterward, gently connect the other end of the cable to the VGA or HDMI input on the TV or Monitor. Connect the Night Owl DVR to a TV or Monitorīefore you proceed with the installation of Night owl wired security cameras, check your TV or monitor for the availability of VGA or HDMI connecting inputs. Windows® XP, Windows® Vista, Windows® 7 and Windows® 8 Recommended steps regarding how to install Night owl wired security cameras Step 1. Router/Modem with two vacant Ethernet cable inputs Besides that, you will also need the following items for the Night owl wired security camera installation purpose.Ī Monitor or Tv with an HDMI or VGA input The above components and accessories come inclusive of the camera kit.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |